布鲁克
Produkty i rozwiązania Aplikacje Serwis Wiadomości i wydarzenia O nas Kariera
Użyj co najmniej 2 znaków (obecnie używasz 1 znaku).

语言

CS/ONH-分析（CS/ONH）

G8 GALILEO

High-end analyzer, designed for automatic and precise determination of O/N/H

The most versatile system available

Mass spectrometric detection capabilities

HerostageG8GALILEO

Najważniejsze informacje

高端设计用于准确性 @高通量

ppb (ng/g)
检测极限
All state-of-the-art detectors used in the G8 GALILEO are equipped with internal reference channels for utmost stability and allow detection limits in a sub-ppm range (based on 1g sample mass)
3+ analyzers
In one single system
该任务是否是通过TCD进行实际H2检测的O/N/H分析，可靠的子PPM在高纯度Al中的H确定H，焊缝中的扩散和残留氢，还是对添加剂制造的粉末原料分析，或者在最终部分：G8 Galileo可以配备几乎所有分析挑战。
0-100 AMU
M/z质谱仪（MS）的范围
工业级Mbob娱乐平台S是为氢和氩检测制造的，配备了优化的离子源和通道探测器。使用极有效的气体入口系统，它在较低的Ng/g范围内提供了检测极限，相当于几个分子的粒子密度。

将最佳ONH方法匹配 - 惰性气融合 - 与理想的ONH系统：G8 Galileo和G8 Galileo MS

Temperature matters: Melting points of common metals and their oxides, nitrides and hydrides

借助G8 Galileo分析仪，Bruker是唯一一家提供完全集成的ONH解决方案的公司，结合了多个专用系统的好处而没有任何分析妥协或技术限制。G8 Galileo将Smart Molecule Sequence™应用于所有发射气体和实际1：1信息的直接测量 - 没有化学转化，数学校正或未发表的算法。FusionControl，样品的持续接触自由温度测量可确保正确的分析温度，避免形成干扰产品并增加稳定性和正常运行时间。

提供自动样品和坩埚处理，电极清洁和自动气体剂量校准的选项。当配备了独特的IR费用时G4 PHOENIX，执行可靠的扩散，残留和总氢测量，并符合ISO 360和AWS A4.3焊接标准。

关键好处：

  • 高级水冷却电极炉配融合控制，水冷却样品端口，高容量的防尘陷阱，然后进行有效的在线粒子过滤
  • 智能分子序列™: Direct and unadulterated measurements of all emitted gases by state-of-the-art detectors with reference channels
  • Automatic furnace cleaning, crucible and sample handling available
  • Unique external IR-furnace for diffusible hydrogen determination available
  • 自动且可靠的气体校准，有10种不同的体积
  • 通过MS耦合获得的热解吸质谱（TDM）和氩包含分析

Cechy Charakterystyczne

G8 Galileo- onh Analysis @最好的

G8 Galileo MS -O，N，H，AR，TDMS
onh @高吞吐量与自动化
用电极清洁的自动坩埚处理
外部红外炉
Electrode furnace with FusionControl
Unique gas calibration unit with 10 volumes

Korzyści

Why do I need Inert Gas Fusion Analysis?

The three non-metals Oxygen (O), Nitrogen (N) and Hydrogen (H) determine the quality, service life and mechanical properties of all metallic materials. Unlike metallic alloy components, the amount of O, N and H sometimes changes considerably along the entire process chain, from the production of raw materials to the completion of the finished product. Similar applies to argon inclusions, introduced at trace level during metal powder production by atomization that will remain in the final product.
获取有关扩散氢及其破坏性机制的动力学信息是实际背景的进一步示例，例如开发新一代的高强度钢，适合氢气储存的材料或生物医学植入物。bob综合游戏

Aplikacje

G8 Galileo应用

铁，钢，钴，镍，铁合金

Determining the amount of oxygen and nitrogen is critical during the steel making process, the final alloy adjustment by addition of ferroalloys but also for the production of nickel- and cobalt-base alloys. The G8 GALILEO combines the ease-of-use and robustness to deliver fast and accurate oxygen and nitrogen results for the Quality- and Process-Control in these production processes.
Read more

铜生产

The most important quality factor when grading copper is the level of residual impurities, primarily the oxygen level. High oxygen levels increase the tendency for hydrogen embrittlement and intergranular failure. The Smart Molecule Sequence™, ensures the G8 GALILEO analyses oxygen with high reliability and low cost of ownership, while precise simultaneous oxygen and hydrogen analysis is available in dual element configurations with FusionControl.
Read more

钛，锆和其他难治金属

Titanium combined with elements like aluminum, vanadium, molybdenum produces low-density, high-strengths alloys with excellent corrosion-resistance. These high performance alloys used in space, aviation, military, nuclear, biomedical and other demanding applications are affected by their oxygen and nitrogen content, but the most critical specification is the hydrogen content leading to hydride precipitation and subsequent cracking. The G8 GALILEO is prepared to address the needs of these demanding industries.
Read more

金属加工

从不锈钢，铝，铜，镍，钛到锆和更多特殊的金属成分，G6 Leonardo为航空，空间，汽车，生物医学，电子和类似行业提供了有关化学材料成分的重要知识。
Read more

Aluminum and Magnesium

氧and hydrogen play a dominant role during the production and processing of these reactive light metals. Oxygen forms insoluble, refractory inclusions whereas hydrogen, dissolved in the liquid melt, is trapped during solidification, creating hydrogen filled voids and blisters. With its unique FusionControl and SampleCare™, the G6 LEONARDO is an ideal quality control tool for the aluminum producing industry.
Read more

Magnetic Materials

The evolution of high strengths permanent magnets is related to the application of rare earth metals. Sintered Nd-Fe-B magnets show a high tendency to absorb hydrogen, leading to fatal hydrogen embrittlement. Actually, hydrogen is a vital agent in the manufacturing process but is also during recycling of the rare earth metal, while oxygen reduces the magnetic efficiency. The G6 LEONARDO is an economic and easy-to-use tool for process control on both elements during all production stages.
Read more

粉状冶金和添加剂制造

Metal powders used in additive manufacturing and other powder metallurgical processes are high purity materials with strictly defined particle properties. Their large specific surface makes them susceptible to “aging” by oxidation/moisture along the production chain with oxygen and hydrogen content dominating the yield rate and product quality. The ready-to-use G6 LEONARDO addresses the needs of such emerging industrial applications.
Read more

玻璃和陶瓷

From industry refractory materials to high performance ceramics in electronics or in metal cutting, refractory oxides, nitrides and carbides have a wide usage. The unique properties of glass and ceramics are influenced in fundamental ways by the level of oxygen, nitrogen and hydrogen present in the process or in the final product. With SampleCare™, FusionControl and its robustness, the G6 LEONARDO is an excellent tool for the fast analysis of raw materials, intermediates and final products.
Read more

焊接和相关过程

Bruker独特的G8 Galileo IR得到了ISO 3690和AWS A4.3的支持，并可以快速评估焊接过程中引入的扩散氢水平。由于其速度，它可以在测试样品上进行预焊接实验，从而帮助焊接行业避免昂贵的故障。
READ MORE

热解吸质谱

Thermal Desorption Mass Spectroscopy (TDMS) with temperature ramps provides kinetic information like the trapping-energy of hydrogen within a metal structure. Terms like diffusible, weakly or strongly trapped, and chemically bound hydrogen can be directly correlated with the supplied activation energy. Bruker’s unique G8 GALILEO MS is capable to analyze hydrogen or isotopes like deuterium at concentrations of a few ng/g. This enables precise mechanism investigations needed for the development of new alloy generations or alloys suitable for hydrogen storage.

SpecyFikaCje

G8 Galileo规格

规格 Benefit

探测器

氧		 Nondispersive IR absorption of CO, no moving parts, dual-range detectors with reference beam and on-board linearization Reliable, maintenance-free performance without drift
Nitrogen and Hydrogen Thermal conductivity detector with reference channel and adjustable gain amplifier 可靠，可调节的范围，自由漂移
氩和氢 Mass spectrometer 1-100 amu, single quadrupole, optimized EI source and channeltron detector 独特的质谱性能，灵敏度：一些分子
Carrier Gases He (O, N), Ar (O, N), N2 (H) each 99.995 % purity (99.9990 % for trace analysis) Flexible carrier gas choice without compromises
Calibration Gas 纯气或认证的混合物（每种化合物为99.999％），气体剂量设备中有10卷，以覆盖巨大的范围 简单，精确的气体校准，没有标准，直接可追溯到基本
参数（压力，温度，体积）
样品尺寸 Electrode Furnace: 8 x 8 mm cross section (pieces, chips, pins, granules), sample ports available for special applications
有限公司oling Water 电极炉:4 3酒吧供应《l / mine IR Furnace: 1 l/min at 3 bar supply pressure, 15 – 20 °C inlet temperature, 100 – 240 V / 50 – 60 Hz Fits on every usual tap water line, tap water-saving design with solenoid valve, chiller also possible

Power Supply

G8 GALILEO
 400 – 480 VAC (± 10 %), 50 – 60 Hz, 32 A, 7 kVA, 1 Phase plus N or 2 Phase, grounding wire
Mass Spectrometer (MS) 230 VAC, 50 – 60 Hz, 250 VA 灵活，全球功率和当前配置
外部红外炉 230 VAC, 50 – 60 Hz, 1,500 VA 灵活，全球功率和当前配置
Dimensions and Weight
G8 GALILEO 80 x 60 x 83 cm (W x D x H), ~130 kg*)
Mass Spectrometer
 63 x 64 x 48厘米（w x d x H），〜60 kg
外部红外炉 48 x 66 x 30 cm (W x D x H), ~15 kg
*) Depending on configuration

Webinary

Webinars

więcejInformacji

G8 GALILEO Resources

小册子和传单与实验室报告

Posters & Articles

Subscribe FIRST Newsletter

Wsparcie

Service & Support

We provide:

  • 高技能故障排除专业人员的帮助办公桌支持，隔离和解决硬性和软件问题
  • Web-based remote instrument service for service diagnosis and applications support
  • 合并现实支持 - 您身边的虚拟工程师（video）
  • Planned maintenance, according to your requirement
  • 客户现场维修和保养服务bob电竞官方网站
  • 备件的可用性通常在全球的几个工作日或几个工作日之内
  • 有限公司mpliance services for installation qualification, operational qualification / performance verification
  • Site planning and relocation
  • Find your next训练课程

Check out oursupport websitefor:

  • 软件更新
  • Product manuals & installation guides
  • Training videos

Registration required.

skontaktujsięz ekspertem

有限公司ntact Information

有限公司ntact Form
销售联系

销售量

对于我们的产品和解决方案，请与我们联系。
销售量
有限公司ntact Form
Service contact

bob电竞官方网站

有关服务bob电竞官方网站和支持，请与我们联系。
bob电竞官方网站
地址和电话号码
telephone headset service

布鲁克AXS Offices

Get in touch with your local Bruker AXS office.
布鲁克AXS Offices Worldwide