SKYSCAN 1275
Ultimate Ease-of-Use
Najważniejsze informacje
Highlights
SKYSCAN 1275 – 3D XRM for Everyone
桌面Skyscan 1275是真正的3D X射线显微镜电源包，设计用于快速扫描各种样品。由于紧凑的几何形状和快速平板检测器的结果可能会短短几分钟。只是QC和生产监控的理想选择。
SKYSCAN 1275 comes furthermore with a high level of automation thus providing superior ease-of-use. Simply pushing the button at the control panel starts an auto-sequence of a fast scan, followed by reconstruction and volume rendering. All executed while the next sample is already being scanned.
可选的16位样品更换器甚至允许无人看管的高吞吐量扫描。
SKYSCAN 1275 is complemented by 3D.SUITE. This extensive software suite covers GPU-accelerated reconstruction, 2D/ 3D morphological analysis, as well as surface and volume rendering visualization.
Market Gallery
Additive Manufacturing
Medical Devices
Energy Storage / Batteries
Geological/ Petrochemical
Building Materials
Electronic Components/Devices
Cechy charakterystyczne
Key Features
Push-Button XRM
只需手动或自动插入样品，并获得完整的3D音量，而无需任何其他交互。
Push-Button XRM includes everything: automatic sample size detection, sample scanning, 3D reconstruction, and 3D volume rendering. Ideal for routine tasks, or operation by non-expert users!
您需要完全控制吗？没问题，Skyscan 1275提供了所有功能。
结合样品更换器Skyscan 1275甚至可以工作24/7。
Sample changer
SKYSCAN 1275 can optionally be equipped with an external 16-position sample changer to increase throughput for QC and routine analysis.
The sample changer accepts a variety of sample sizes, up to a diameter of 96 mm.
Samples can be can be easily replaced at any time without interrupting an ongoing scanning process. New samples are automatically detected, and LED‘s indicate the status for every scan: ready, scanning, done.
原位阶段
The Bruker material testing stages are designed to perform compression experiments up to 4400 N and tensile experiments up to 440 N. All stages automatically communicate through the system’s rotation stage, without the need of any cable connections. Using the supplied software, scheduled scanning experiments can be set up.
Bruker's heating and cooling stages can reach temperatures of up to +80ºC, or 30ºC below ambient temperature. Just like the other stages, no extra connections are needed, and there is an automatic recognition of the stage. Using the heating & cooling stages, samples can be examined under non-ambient conditions, to evaluate the effect of temperature on the sample’s microstructure.
SKYSCAN 1275
No external cooling water or special power with no compromise in performance: Designed for the ecological and economical needs of today
Helical Scanning
Cone-beam geometry (top) can cause artefacts when reconstructing horizontal structures in a sample. Helical scanning (bottom) prevents such artefacts with a spiral trajectory during the acquisition phase.
Aplikacje
突出显示应用程序
Additive Manufacturing
Additive manufacturing, also commonly called 3D printing, allows the creation of components with complex external and internal structure. Unlike classic techniques which require special molding or tooling, additive manufacturing allows the economical production of both one piece prototypes and large batch production parts. Once completed, confirmation of both the internal and exterior structure is important in ensuring that the component will perform as intended. XRM allows this inspection in a non-destructive manner, giving confidence that a component will meet or exceed specifications.
- Inspection of internal voids for trapped powder
- Validation of external and internal dimensions
- Direct comparison with CAD models
- Analysis of single and multi-material components
Medical Devices and Pharmaceutical Packaging
设计和测试包装组件是确保可以以适当安全的方式向患者提供药物的关键任务。XRM允许以非破坏性的方式快速检查QC，从而对生产过程和生产产品的性能充满信心。
- High-throughput scanning of medical devices for QC
- Investigate the integrity of pharmaceutical packaging up to a size of 10 cm x 10 cm x 10 cm
- Monitor and control the quality and alignment of internal metal and plastic components
- 测量外部和内部维度，并检测缺陷
Geology
XRM enables non-destructive characterization of a wide variety of geomaterials, from small mineral samples up to large drill cores at full-core size.
- Quantitative analysis of structural parameters, such as grain size, open/closed porosity and connectivity
- Calculate the distribution of mineral phases in 3D
- Correlate the sample structure with mechanical properties by apply in-situ mechanical tests
- 可视化流体流动、结晶、解散and other processes in porous media
Application Gallery
Specyfikacje
SKYSCAN 1275 Specifications
Feature |
Specification |
Benefit |
X射线源 |
20 – 100 kV 10 W < 5 µm spot size at 4 W |
Maintenance-free sealed X-ray source Fast scans for QC, or 4D XRM |
X-ray detector |
有源像素CMOS平板 3 MP (1944 x 1536) 75 µm pixel size |
Excellent signal-to-noise 大型视野 |
对象大小 |
96 mm diameter 120 mm height |
Capable to scan a large range of sample sizes |
Sample changer (optional) |
16 samples up to 50 mm diameter 8 samples up to 96 mm diameter 外部访问 |
无人值守throu高ghput Any combination of large and small samples Add/remove samples at any time without interrupting the actual scan |
Dimensions |
W 1040 mm x D 665 mm x H 400 mm Weight 170 kg |
Space-saving desktop system that fits in every lab |
Power supply |
100-240V AC, 50-60Hz, 3A max. |
Minimum installation requirements, a standard power supply suffices |
Oprogramowanie
POSITION, SCAN, RECONSTRUCT and ANALYZE
Bruker XRM解决方案包括收集和分析数据所需的所有软件。具有用户指导参数优化的直观图形用户界面支持专家和新手用户。通过使用最新的GPU动力算法，重建时间大大减少。CTVOX，CTAN和CTVOL结合在一起，形成了一个强大的软件套件，用于模型的定性和定量分析。
Measurement Software:
SKYSCAN 1275 – Instrument control, measurement planning and collection
重建软件：
NRECON - 将2D投影图像转换为3D卷
分析软件：
DATAVIEWER– Slice-by-slice inspection of 3D volumes and 2D/3D image registration
CTVOX- 通过音量渲染的现实可视化
CTAN– 2D/3D image analysis & processing
CTVOL– Visualization of surface models to export for CAD or 3D printing
Webinary
网络研讨会
Więcej informacji
WSPARCIE
Service & Support
We provide:
- Help desk support from highly-skilled troubleshooting professionals, to isolate and resolve hard- and software problems
- Web-based remote instrument service for service diagnosis and applications support
- Merged reality support – a virtual engineer at your side (video)
- 根据您的要求，计划维护
- Customer on-site repair and maintenance service
- Spare parts availability typically over night or within a few working days worldwide
- Compliance services for installation qualification, operational qualification / performance verification
- Site planning and relocation
- Find your nexttraining course
Check out oursupport websitefor:
- Software updates
- Product manuals & installation guides
- Training videos
Registration required.
