Skyscan 1275
最终的易用性
强调
强调
Skyscan 1275– 3D XRM for Everyone
The desktop SKYSCAN 1275 is a real 3D X-ray microscopy power pack, designed for fast scanning of a wide range of samples. Thanks to the compact geometry and fast flat-panel detector the time to result can be as short as a few minutes. Just ideal for QC and production monitoring.
Skyscan 1275随着高水平的自动化而出现，从而提供了出色的易用性。只需在控制面板上按下按钮即可开始进行快速扫描的自动序列，然后进行重建和音量渲染。所有在下一个样本已经被扫描时执行。
The optional 16-position sample changer even allows for unattended high throughput scanning.
Skyscan 1275由3D.Suite补充。这个广泛的软件套件涵盖了GPU加速重建，2D/ 3D形态学分析以及表面和体积渲染可视化。
Market Gallery
Additive Manufacturing
医疗设备
Energy Storage / Batteries
地质/石化
Building Materials
电子组件/设备
Eigenschaften
主要特征
按钮XRM
Just insert a sample, manually or automatically, and get a complete 3D volume without any further interaction.
按钮XRM includes everything: automatic sample size detection, sample scanning, 3D reconstruction, and 3D volume rendering. Ideal for routine tasks, or operation by non-expert users!
You need full control? No problem, SKYSCAN 1275 offers all features.
Combined with a sample changer SKYSCAN 1275 even works 24/7.
Sample changer
Skyscan 1275可以选择配备外部16位样品更换器，以增加QC和常规分析的吞吐量。
样品更换器接受多种样本量，直径为96毫米。
可以随时轻松更换样品而不会中断正在进行的扫描过程。自动检测到新样本，并指示每次扫描的状态：准备就绪，扫描，完成。
In-situ stages
The Bruker material testing stages are designed to perform compression experiments up to 4400 N and tensile experiments up to 440 N. All stages automatically communicate through the system’s rotation stage, without the need of any cable connections. Using the supplied software, scheduled scanning experiments can be set up.
Bruker的加热和冷却阶段可以达到高达 +80ºC的温度，即低于环境温度的30ºC。就像其他阶段一样，不需要额外的连接，并且对舞台有自动识别。使用加热和冷却阶段，可以在非镜头条件下检查样品，以评估温度对样品微观结构的影响。
Skyscan 1275
没有外部冷却水或特殊功率，没有绩效妥协：为当今的生态和经济需求而设计
Helical Scanning
Cone-beam geometry (top) can cause artefacts when reconstructing horizontal structures in a sample. Helical scanning (bottom) prevents such artefacts with a spiral trajectory during the acquisition phase.
安温登根
Highlighted Applications
Additive Manufacturing
添加剂制造（通常称为3D打印）允许创建具有复杂外部和内部结构的组件。与需要特殊成型或工具的经典技术不同，添加剂制造可以经济地生产一件原型和大批量生产零件。完成后，对内部和外部结构的确认对于确保组件将按预期执行至关重要。XRM允许以非破坏性方式进行此检查，使组件满足或超过规格的信心。
- Inspection of internal voids for trapped powder
- 验证外部和内部维度
- 与CAD模型的直接比较
- Analysis of single and multi-material components
医疗设备和药品包装
Designing and testing packaging assemblies is a critical task to ensure medicine can be delivered in a proper and safe way to the patient. XRM allows fast inspection for QC in a non-destructive way, giving confidence in the production process and the resulting product’s performance.
- High-throughput scanning of medical devices for QC
- 调查最高10 cm x 10 cm x 10 cm大小的药物包装的完整性
- 监视和控制的质量和一致性nternal metal and plastic components
- Measure external and internal dimensions, and detect defects
Geology
XRM enables non-destructive characterization of a wide variety of geomaterials, from small mineral samples up to large drill cores at full-core size.
- Quantitative analysis of structural parameters, such as grain size, open/closed porosity and connectivity
- 计算3D中矿物相的分布
- Correlate the sample structure with mechanical properties by apply in-situ mechanical tests
- 可视化多孔介质中的流体流，结晶，溶解和其他过程
应用程序库
Spezifikationen
Skyscan 1275规格
特征 |
Specification |
Benefit |
X-ray source |
20 – 100 kV 10 W <5 µm斑点大小在4 W |
Maintenance-free sealed X-ray source 快速扫描QC或4D XRM |
X射线检测器 |
主动像素CMOS平板板 3 MP (1944 x 1536) 75 µm pixel size |
Excellent signal-to-noise Large Field-of-View |
Object size |
96 mm diameter 120 mm height |
Capable to scan a large range of sample sizes |
Sample changer (选项al) |
直径为50毫米的16个样品 直径为96毫米的8个样品 External access |
无人看管的高吞吐量 大小样品的任何组合 随时添加/删除样品，而无需中断实际扫描 |
方面 |
W 1040毫米X D 665毫米X H 400毫米 重量170公斤 |
Space-saving desktop system that fits in every lab |
Power supply |
100-240V AC, 50-60Hz, 3A max. |
Minimum installation requirements, a standard power supply suffices |
Software
POSITION, SCAN, RECONSTRUCT and ANALYZE
布鲁克XRM solutions include all software needed to collect and analyze data. An intuitive graphical user interface with user guided parameter optimization support both expert and novice users. By using the latest GPU powered algorithms, reconstruction time is substantially reduced. CTVOX, CTAN and CTVOL combine to form a powerful suite of software for both qualitative and quantitative analysis of models.
测量软件：
Skyscan 1275– Instrument control, measurement planning and collection
Reconstruction Software:
NRECON – Transforms the 2D projection images into 3D volumes
Analysis Software:
Dataviewer- 逐片检查3D卷和2D/3D图像注册
CTVOX– Realistic visualization by volume rendering
ctan- 2D/3D图像分析与处理
CTVOL- 可视化表面模型以导出CAD或3D打印
Webinare
Webinars
Mehr Informationen
Support
bob电竞官方网站服务支持
我们提供：
- 高技能故障排除专业人员的帮助办公桌支持，隔离和解决硬性和软件问题
- Web-based remote instrument service for service diagnosis and applications support
- Merged reality support – a virtual engineer at your side (视频）
- Planned maintenance, according to your requirement
- Customer on-site repair and maintenance service
- Spare parts availability typically over night or within a few working days worldwide
- 安装资格，运营资格 /bob电竞官方网站绩效验证的合规服务
- Site planning and relocation
- 找到你的下一个training course
Check out oursupport website为了：
- Software updates
- Product manuals & installation guides
- Training videos
Registration required.
