D8 ENDEAVOR

D8努力不仅进行了24/7的大型操作。在引擎盖下，您会发现最好的Bruker XRD技术，这是满足最高分析需求的关键。

• Dynamic Beam Optimization (DBO) – no instrument reconfiguration by the operator needed. Motorized optics optimally adapt the beam-path geometry to the measurement conditions needed for various materials
• LYNXEYE detectors – highest data quality and lowest quantification limits. The energy discriminating LYNXEYE XE-T detector exhibits unprecedented fluorescence and white beam residue suppression, high count rate capability paired with excellent angular resolution. And, there is no more need for secondary monochromators or primary Kß filters.

• 样品处理 - 通过卸载前一个样品并在当前分析运行时预先加载下一个样本来实现较高的样本周转。可以将新样品放入样品更换器中，而测量值则在不暴露于X射线辐射的情况下运行。

Turn-key versions of the D8 ENDEAVOR are available for the cement, minerals, pharmaceutical, Aluminum, and metals industries.

They include:

• instrument configurations that are tailored to the specific requirements of those industries,
• 优化的数据采集和评估软件包，
• industry specific application training and support.

XRD combined with TOPAS Rietveld analysis is nowadays the most powerful technique for doing quantitative phase analysis of hotmeal, bypass, kilndust, clinker and cements.

结合XRD方法软件包水泥是新的D8努力是该行业的理想解决方案。

It offers direct phase analysis along the entire production process, ranging from raw materials, intermediate products like hotmeal and dusts (REACH) to clinker and the finalized cements. Analytical highlights are the capability to distinguish the Alite polymorphs M1 & M3 and the quantification of amorphous phases by the proprietary PONKCS method.

The most direct method of mineral identification and quantification is powder X-ray diffraction (XRD) with the D8 ENDEAVOR Minerals.

可以使用TOPAS定量分析可靠地分bob综合游戏析复杂的地质材料。

Furthermore, cluster analysis techniques can be used to quickly and automatically analyze large amounts of data for similarities and generate exploration mappings.

X-ray powder diffraction (XRD) is a widely used analytical method for the process and quality control of making steel.

Knowing the exact FeO concentration in the raw material is key to cut the greenhouse-gas emission of iron plants.

FEO量可以直接根据矿物的化学计量和浓度来计算。这些由快速XRD确定的值使其成为滴定的快速替代方法。

Controlling aluminum production is a crucial analytical task that demands a robust X-ray diffraction (XRD) solution.

This is due to the harsh environment in a smelter, where the XRD instrument needs to be located, and the enormous sample throughput required to successively probe hundreds of smelter cells.

The D8 ENDEAVOR addresses these challenges with reliable mechanics and technological innovations that reduce measurement times and expand analysis capabilities.

The D8 ENDEAVOR is best suited to monitor lowest amounts of free silica, a material that causes lung cancer and other severe health issues.

Highest accuracy and a lowest detection limit are achieved with the D8 ENDEAVOR equipped with the LYNXEYE XE-T detector.

为了完成二氧化硅解决方案，Bruker为不同的滤波器类型提供样品持有人，并为Diffrac.dQuant软件提供了完整的方法，该软件符合NIOSH 7500要求，还允许段校准。

D8努力的样本准备工作很小，因为可以同时处理各种样本量和类型。从弹匣到测量位置的标本持有人的握力自动检测出样品持有人的不同高度。

• 标本持有人的行业标准直径为51.5毫米（2'）或40毫米（1.6’）
• Fine grained powder is filled into sample holder cavities of various diameter or depth matching the sample amount.
• 可用于减少首选方向。
• Very small amounts of powder can be prepared on background-free holders.
• 用于过滤器，粘土，固体和环境敏感样品的专业持有人是广泛选择的进一步选择。

The full-featured, and no compromise DIFFRAC.SUITE software package provides the easiest measurement method creation and most powerful and accurate analysis results. All covered with 21CFR Part11 compliance, if required. The DIFFRAC.SUITEMEASUREMENT CENTER，，，，DIFFRAC.EVA对于一般数据评价和聚类分析,but also the COD database for phase identification are always included with two licenses for industrial laboratories and 10 licenses for academic users. Additional licenses are optionally available.DIFFRAC.TOPAS用于定量复杂的多相混合物，而差异offers norm compliant analysis for the industry that are based on calibrations, and therefore most precise.

For industrial process and quality control the D8 ENDEAVOR can be equipped with TOPAS BBQ for automated Black Box Quantification. Also we offer the Bruker turn-key package for the analysis of construction materials that comes with 10 ready-to-run methods that are prepared by our Cement application specialists. The DIFFRAC.SUITE software may be operated in file or database mode and includes a RESULTS MANAGER for multi-sample reporting and time series representations.