Automated X-ray Diffractometer
for high sample turnaround
The D8 ENDEAVOR is made for extremely simple operation, high measurement speed at lowest detection limits and fast sample turnaround. The system is well suited for multi-user operation in industry, academia and research. For industrial process optimization and quality control, the D8 ENDEAVOR can be interfaced to automated sample preparation systems, which feed the samples without further operator actions. This guarantees highest integrity, homogeneity and quality of sample preparation and presentation.
这个分析器容易适合各种各样的实验室and environmental conditions
D8努力,现成的并有任何情况。
Not only is the D8 ENDEAVOR made for rough 24/7 operation. Under the hood you will find the finest Bruker XRD technology that is key for satisfying highest analytical demands.
Daily use of the D8 ENDEAVOR has the operator in mind and is not exclusive to the XRD expert.
D8努力的旋转版本可用于水泥,矿物质,药品,铝和金属工业。
They include:
XRD combined with TOPAS Rietveld analysis is nowadays the most powerful technique for doing quantitative phase analysis of hotmeal, bypass, kilndust, clinker and cements.
Combined with the XRD Method Package Cement the new D8 ENDEAVOR is the perfect solution for the industry.
它在整个生产过程中提供了直接的相分析,从原材料,中间产品(如热砂和灰尘(覆盖范围))到熟料和最终水泥。bob综合游戏分析的亮点是通过专有PONKCS方法区分Alite多晶型物M1和M3的能力。
矿物鉴定和定量的最直接方法是用D8努力矿物质粉末X射线衍射(XRD)。
Complex geologic materials can reliably be analyzed using TOPAS quantitative analysis.
此外,群集分析技术可用于快速并自动分析大量数据以获得相似性并生成勘探映射。
X-ray powder diffraction (XRD) is a widely used analytical method for the process and quality control of making steel.
Knowing the exact FeO concentration in the raw material is key to cut the greenhouse-gas emission of iron plants.
The FeO amount can directly be calculated from the stoichiometry and concentration of the minerals. These values determined by rapid XRD makes it a very fast alternative to titration.
Controlling aluminum production is a crucial analytical task that demands a robust X-ray diffraction (XRD) solution.
这是由于需要找到XRD仪器的冶炼厂中的恶劣环境,以及连续探测数百个冶炼厂细胞所需的巨大样品吞吐量。
The D8 ENDEAVOR addresses these challenges with reliable mechanics and technological innovations that reduce measurement times and expand analysis capabilities.
D8努力最适合监测最低量的自由二氧化硅,这是一种导致肺癌和其他严重健康问题的材料。
Highest accuracy and a lowest detection limit are achieved with the D8 ENDEAVOR equipped with the LYNXEYE XE-T detector.
To complete the silica solution, Bruker offers sample holders for different filter types and a complete method for the DIFFRAC.DQUANT software, which is compliant with NIOSH 7500 requirements and also allow segment calibrations.
Specification |
益处 |
|
Generator |
3 kW 1 kW ECO |
Fastest scan time, lowest detection and quantification limits Low power consumption, single phase power, no external cooling water required |
Sample handling |
Magazines with 66 samples 51.5 mm (2‘’) diameter or 72 samples with 40 mm (1.6’’) diameter Easyloadtrays for 20 samples of 2’’ diameter Robotic or conveyor belt loading |
行业标准尺寸,与自动样本准备和自动化概念兼容 Manuel loading of off-line prepared samples Automated instruments operation without operator interaction |
Beam optics |
动态束优化 |
仪器适应最佳测量条件,而无需手动重新配置。无需专业知识 |
Motorized Anti-Scatter Screen |
降低空气散射背景,以更好地峰值与背景比和提高检测和定量的限制 |
|
Push button operation |
装载机软件和触摸控制 |
仪器操作只有最少的培训要求 |
Detectors |
比例CA XRF计数器 SSD160-2 LYNXEYE-2 LYNXEYE XE-T (*)探测器保证 |
Element channel for Al production control Si-strip detector with 160 channels Ultra fast 1D detector (*) Ultra sensitive, energy dispersive 1D detector (*) absolutely faultless, no dead strips |
Goniometer |
theta/theta |
Sample always horizontal and cannot fall off during measurement Unique alignment guarantee of +/- 0.01° 2Theta over entire measurement range, traceable with included certified reference material NIST corundum |
安全 |
German type approval CE Compliance |
Highest standards for operator safety Machinery Directive (2006/42/EC), Electrical Equipment (2014/35/EU) Electromagnetic compatibility (2014/30/EU) |
Sample preparation efforts for the D8 ENDEAVOR are minimal, as a wide range of sample sizes and types can be handled simultaneously. The gripper that loads the specimen holders from the magazine to the measurement position automatically detects different heights of specimen holders.
功能齐全的,没有妥协IFFRAC.SUITE software package provides the easiest measurement method creation and most powerful and accurate analysis results. All covered with 21CFR Part11 compliance, if required. The DIFFRAC.SUITEMEASUREMENT CENTER,DIFFRAC.EVA为了进行一般数据评估和集群分析,以及两个工业实验室的许可证和10个学术用户的许可证始终包含用于阶段识别的COD数据库。bob娱乐平台可以选择其他许可证。diffrac.topasis used for the quantification of complex multi-phase mixture, whereasDIFFRAC.DQUANT为基于校准的行业提供规范分析,因此最精确。
For industrial process and quality control the D8 ENDEAVOR can be equipped with TOPAS BBQ for automated Black Box Quantification. Also we offer the Bruker turn-key package for the analysis of construction materials that comes with 10 ready-to-run methods that are prepared by our Cement application specialists. The DIFFRAC.SUITE software may be operated in file or database mode and includes a RESULTS MANAGER for multi-sample reporting and time series representations.
我们提供:
看看我们支持网站for:
Registration required.