样品的尖锐3D景观
SKYSCAN 1272 CMOS Edition builds on the trusted SKYSCAN 1272 desktop X-ray Microscopy platform and incorporates the latest X-ray technologies to bring XRM to the next level.
最先进的16百万像素CMOS X射线检测器提供具有出色分辨率的高对比度图像。扩展的检测器视野和对X射线的灵敏度增强的敏感性可导致扫描时间短两倍。
The SKYSCAN 1272 CMOS offers automatic selection of parameters with Genius-Mode. Magnification, energy, filter, exposure time and background corrections can all be optimized automatically with a single click.
可选的16位样品更换器可用于无人看管的高吞吐量扫描。
Skyscan 1272 CMOS由3D.Suite补充。这个全面的软件套件涵盖了GPU加速重建,2D/ 3D形态学分析以及表面和体积渲染可视化。
药品
多孔媒体
建筑材料bob综合游戏
Electronic Components/Devices
Geological/ Petrochemical
纤维/复合材料
The SKYSCAN 1272 CMOS offers automatic selection of parameters with Genius-Mode. Magnification, energy, filter, exposure time and background corrections can all be optimized automatically with a single click.
此外,样品和大型CMOS摄像机都可以尽可能靠近来源,从而大大增加了测得的强度。这就是为什么Skyscan 1272 CMO与具有固定相机位置的常规系统相比,扫描速度高5倍。
SKYSCAN 1272 CMOS can optionally be equipped with an external 16-position sample changer to increase throughput for QC and routine analysis.
The sample changer accepts a variety of sample sizes, up to a diameter of 96 mm.
Samples can be can be easily replaced at any time without interrupting an ongoing scanning process. New samples are automatically detected, and LED‘s indicate the status for every scan: ready, scanning, done.
Bruker材料测试阶段旨在执行高达4400 N的压缩实验和最高440 N的拉伸实验。所有阶段都可以通过系统的旋转阶段自动通信,而无需任何电缆连接。使用提供的软件,可以设置计划的扫描实验。
布鲁克's heating and cooling stages can reach temperatures of up to +80ºC, or 30ºC below ambient temperature. Just like the other stages, no extra connections are needed, and there is an automatic recognition of the stage. Using the heating & cooling stages, samples can be examined under non-ambient conditions, to evaluate the effect of temperature on the sample’s microstructure.
SKYSCAN 1272 CMOS
没有外部冷却水或特殊功率,没有性能妥协: Designed for the ecological and economical needs of today
SKYSCAN 1272 CMOS
智能解决方案和设计,例如集成振动隔离,形成完美的整体
By combining materials into a composite the resulting component can have increased strength while significantly decreasing weight. Further optimization comes from ensuring the orientation of the subcomponents are optimized. One of the classic components used are fibers ranging from steel rebar in concrete, glass fibers in electronic components, to carbon nanotubes in aviation materials. XRM allows inspection of fibers and composites without the need for cross sectioning, ensuring the condition of the sample is not affected by sample preparation.
Development of a new pharmaceutical is a time consuming and costly endeavor. XRM can accelerate time-to-market by providing immediate feedback on the product’s internal structure during the product formulation stage.
泡沫s are widely used for industrial applications. Whether they are used as thermal or acoustic insulators, shock absorbers in protective parts, filters … depends on the material and the structural properties of the foam.
XRM enables to visualize a foam’s 3D internal structure in a non-destructive way.
电子产品
地质学
木头
Food
Porous Structures
Feature |
规格 |
益处 |
X-ray source |
40 – 100 kV 10 W < 5 µm spot size at 4 W |
无维护密封X射线源 Fast scans for QC, or 4D XRM |
X-ray detector |
CMOS detector 16 MP(4096 x 4096) |
Fine-pitched detectors for achieving highest resolution |
Object size |
直径75毫米 80 mm height |
Capable to scan from small to medium large sample sizes |
样品更换器 (选修的) |
直径为50毫米的16个样品 8 samples up to 96 mm diameter External access |
无人看管的高通量 Any combination of large and small samples Add/remove samples at any time without interrupting the actual scan |
Dimensions |
W 1160 mm x D 520 mm x H 330 mm Weight 150 kg |
节省空间桌面系统,适合每个实验室 |
电源 |
100-240V AC,50-60Hz,最大3A。 |
最低安装要求,标准电源就足够了 |
包括所有的软件需要t力量XRM解决方案o collect and analyze data. An intuitive graphical user interface with user guided parameter optimization support both expert and novice users. By using the latest GPU powered algorithms, reconstruction time is substantially reduced. CTVOX, CTAN and CTVOL combine to form a powerful suite of software for both qualitative and quantitative analysis of models.
Measurement Software:
SKYSCAN 1272 – Instrument control, measurement planning and collection
重建软件:
NRECON – Transforms the 2D projection images into 3D volumes
Analysis Software:
DATAVIEWER– Slice-by-slice inspection of 3D volumes and 2D/3D image registration
CTVOX– Realistic visualization by volume rendering
CTAN– 2D/3D image analysis & processing
ctvol- 可视化表面模型以导出CAD或3D打印
We provide:
看看我们支持网站for:
需要注册。